Truck Caps, Bed Covers, Bed Liners, Steps, Truck Accessories (2024)

Lightweight HD Aluminum Design: This killer bumper offers a lightweight heavy duty solution to protect the front end of your Jeep. The full-width version weighs in at 71 pounds while the stubby version weighs in at a mere 64 pounds. You can even shave off another 8 pounds if you choose not to install the included Over Rider Hoop.

Off-Road Winch Ready: The premium winch plate is made from a 5mm thick steel plate with a standard 10" x 4.5" bolt pattern accepting most winches up to 12,000 lbs. This winch plate will allow you to add much-needed recovery to the front of your Jeep Wrangler JL and Gladiator JT.

Versatile Grille Guard: The removable aluminum over rider hoop has sleek dimpled speed holes and is made from durable 4mm thick material. This over-rider hoop features a series of holes and slots for limitless auxiliary light mounting options. The top side offers slotted 8mm holes that will accommodate light bars with mounting dimensions of 17-3/4" up to 23" wide, while the additional 2 - 10mm holes are 12-5/8" apart. This variety of mounting options gives you the ability to mount lights that look cool, suit your specific needs, and allow you to give your bumper that custom look.

Ultimate Recovery & Jacking Points: The supplied D-ring mounts are made from 3/4" thick steel and have integrated tow strap hooks on top. The integrated holes accept 3/4" D-Rings using a 7/8" pin size giving your Jeep a bold aggressive look with multiple recovery points for all your trail riding adventures. The face of the bumper offers two stout Hi-Lift jack points for safe and simple jacking. These holes also help prevent the jack from sliding off for a safer user-friendly solution. For superior strength, the Hi-Lift jack will lift up on the steel plate winch mount behind the aluminum bumper fascia.

Simple No Drill Installation: This bumper is a direct bolt-on installation that does not require any drilling or modification. This easy installation is for the do-it-yourself installer that can be done with basic hand tools. Will fit the Mojave edition with minor trimming of approximately 1" off the factory skid plate.

Lightweight HD Aluminum Design: This killer bumper offers a lightweight heavy duty solution to protect the front end of your Jeep. The full width version weighs in at 71 pounds while the stubby version weighs in at a mere 64 pounds. You can even shave off another 8 pounds if you choose not to install the included Over Rider Hoop. A design that offers a significant weight savings over comparable all steel bumpers. Lighter weight means less change in gas mileage and without the heavy weight of a steel bumper you won't have to worry about the front end dipping down while braking.

Off-Road Winch Ready: The premium winch plate is made from a 5mm thick steel plate with a standard 10" x 4.5" bolt pattern accepting most winches up to 12,000 lbs. This winch plate will allow you to add much needed recovery to the front of your Jeep Wrangler JK. Winch sold separately.

Stout Recovery & Jacking Points: The welded steel D-Ring mounts are made from 3/4" thick steel and have integrated tow strap hooks on top. The integrated holes accept 3/4" D-Rings (sold separate) using a 7/8" pin size giving your Jeep a bold aggressive look with multiple recovery points for all your trail riding adventures. The face of the bumper offers two stout Hi-Lift jack points for safe and simple jacking. These holes also help prevent the jack from sliding off for a safer user friendly solution. For superior strength the Hi-Lift jack will lift up on the steel plate winch mount behind the aluminum bumper fascia.

Versatile Grille Guard: The removable aluminum over rider hoop has sleek dimpled speed holes and is made from durable 4mm thick material. Measuring 40" wide at the base and features a series of holes and slots for auxiliary light mounting.These holes and slots offer limitless auxiliary light mounting options. The top side offers slotted 8mm holes that will accommodate light bars with mounting dimensions of 17-3/4" up to 23" wide, while the additional 2 - 10mm holes are 12-5/8" apart. This variety of mounting options gives you the ability to mount lights that look cool, suit your specific needs and allow you to give your bumper that custom look.

Simple No Drill Installation: This bumper is a direct bolt on installation that does not require any drilling or modification. This easy installation is for the do it yourself installer that can be done with basic hand tools.

Please Note: Not compatible with Quadratec Aluminum Modular Front Sway Bar Skid Plate without modification.

Full Width or Stubby Available

Trail-Ready Strength: QRC Front Winch Bumpers are full welded and engineered with one piece steel construction to take on whatever the environment has to offer.

Nature Resistant: Bumper is e-coated for corrosion resistance and finished off with a durable light textured black power coating to seal out the elements.

Recovery Friendly: Offers D-Ring mounts and fully integrated winch plate to safely and efficiently fit your recovery products.

Full Width or Stubby Available

Trail-Ready Strength: QRC Front Winch Bumpers are full welded and engineered with one piece steel construction to take on whatever the environment has to offer.

Nature Resistant: Bumper is e-coated for corrosion resistance and finished off with a durable light textured black power coating to seal out the elements.

Recovery Friendly: Offers D-Ring mounts and fully integrated winch plate to safely and efficiently fit your recovery products.

Full Width or Stubby Available

Trail-Ready Strength: QRC Front Winch Bumpers are full welded and engineered with one piece steel construction to take on whatever the environment has to offer.

Nature Resistant: Bumper is e-coated for corrosion resistance and finished off with a durable black power coating to seal out the elements.

Recovery Friendly: Offers D-Ring mounts and fully integrated winch plate to safely and efficiently fit your recovery products.

Lighting Customization: QRC Winch Bumpers designed to work with factory fog lights or LED lighting options.

Quadratec's QR3 heavy duty front tubular bumpers are available in three distinctive styles that mount directly to your Jeep® frame with included hardware and detailed instructions. Our front bumpers are contoured to the vehicle for a perfect custom fit. Non-winch mount bumpers are available with or without the center hoop and incorporate two welded auxiliary light mount tabs. Winch mount front bumpers feature welded center hoops and two welded auxiliary light mount tabs. All winch models require an optional winch plate that can be used with most winches including all Q-Series Winches. The durable powder coat finishes features e-coatings for superior adhesion and corrosion resistance and are available in textured black.

When you need a tough and durable "no-nonsense" bumper system, consider the Quadratec QRC Pre Runner style bumper to deliver what you want. Our heavy duty bumpers are designed, engineered and built for off road durability and feature sloping ends to provide greater tire clearance for enhanced approach angles. Constructed from 2" diameter tubing with .120" wall thickness for extreme trail protection and e-coated to prevent corrosion. The center sections of our bumpers accommodate an optional recovery winch and winch plate. QRC front bumpers feature four auxiliary light tabs and welded end caps. Our durable textured black powder coatings provide lasting good looks for many years and carry a full three-year limited warranty.

Note: Auxiliary Lights & D-Rings are Sold Separately.

Available in Gloss or Textured Black

Quadratec's QR3 heavy duty front tubular bumpers are available in three distinctive styles that mount directly to your Jeep® frame with included hardware and detailed instructions. Our front bumpers are contoured to the vehicle for a perfect custom fit. Non-winch mount bumpers are available with or without the center hoop and incorporate two welded auxiliary light mount tabs. Winch mount front bumpers feature welded center hoops and two welded auxiliary light mount tabs. All winch models require an optional winch plate that can be used with most winches including all Q-Series Winches. The durable powder coat finishes features e-coatings for superior adhesion and corrosion resistance and are available in gloss black or textured black.

Winch Ready Design: This strong winch plate is made from a 6mm thick steel plate and completely integrated inside the bumper. It comes pre-drilled with a standard 10" x 4.5" bolt pattern accepting most winches up to 10,000 lbs. This winch plate will allow you to add much needed recovery to the front of your Jeep Wrangler TJ or Unlimited LJ.

Versatile Grille Guard Hoop: The removable over rider hoop allows you to customize the look of your Jeep Wrangler TJ or Unlimited LJ. You can install this stout grille guard to protect your winch and Jeep grille or you can remove it for a clean low-profile style. No matter what you decide it can be easily installed or uninstalled with 2 bolts.

Integrated Recovery Points: The integrated d-ring mounts are made from 1" thick steel for safe recovery. Accepting 3/4" D-Rings using a 7/8" pin size giving your Jeep a bold aggressive look with multiple recovery points for all your trail riding adventures (D-Rings are sold separate).

Simple No Drill Installation: This bumper is a direct bolt on installation that does not require any drilling or modification. This easy installation is for the do it yourself installer that can be done with basic hand tools.

Receiver Hitch Compatible: The bumper is notched in the bottom center for a perfect fit with the factory hitch and aftermarket hitches. Allowing you to maintain your factory tow rating to haul all your other toys. The hitch is Not included with the bumper, so be sure to purchase one unless you already have it installed on your Jeep.

License Plate Mount: The included license plate mount installs on the driver side to existing holes on the bumper. The bolt-on design also allows you the ability to use other license plate mounting options if preferred. Be sure to also purchase the license plate light which is sold separately for proper visibility.

Large Spare Tire Opening: Compatible with most tires up to 35" mounted in the original position. This large opening measures 39" at the top descending 5" to a width of 32" at the bottom outer edge of the bumper. It also functions as a convenient step to load your roof rack with ease once the spare tire is hinged open. Giving you ample room for both feet to be firmly planted.

No Drill Installation: A quick and easy bolt-on installation that does not require any drilling or modification. For the do it yourself installer and can be mounted with basic hand tools.

Note: Be Sure to Purchase the License Plate Light which is Sold Separate.

Quadratec's Mid-Width Rear Bumper for JK Wrangler features a 4mm thick steel construction and a one piece design that bolts to existing mounting points with no drilling or modifications. Bumpers can accommodate up to a 35" spare tire and measure 64" wide to provide increased tire clearance. Other features include D-ring mounts, installation hardware and detailed instructions. Bumpers are e-coated for corrosion resistance and finished with a durable black textured powder coating. There are two removable cover plates that reveal integrated light mounts for most standard 3" cube lights or surface mount style lights. Our optional plug-n-play rear backup light harness is included with the light kit options and makes installing rear backup lights quick and easy. Works with all popular tow hitches (sold separately). Three year limited warranty.

Please Note: Backup Harness is Only Compatible with USA Model Jeeps and Not for Overseas Models.

Available in Stainless Steel, Gloss & Textured Black

The QR3 heavy duty rear tubular bumpers are the perfect companion to any QR3 front bumper and side bar combination. Rear bumpers feature a cutout to accommodate spare tires up to 33" in diameter. Our rear bumpers feature mandrel bent 3" diameter tubing, that's .07" thick and 62.5" wide. The durable powder coat finishes feature e-coatings for superior adhesion and corrosion resistance and are available in gloss black or textured black. Powder coat finishes carry a three-year limited warranty while our beautiful show polished stainless steel versions carry a limited lifetime warranty.

Rugged Durability: Robust one-piece construction engineered with 6-gauge steel and includes mandrel bent corners for additional side protection.

Hitch Compatible: Bumper notched in the bottom center and perfectly fits with factory and aftermarket hitches.

Recovery Friendly: Includes driver side cut out section to maintain access to factory tow hook.

Weather Protected: Bumper e-coated for superior corrosion resistance and finished with a black powder coating for long lasting performance.

Simple Installation: Quick and easy bolt-on application utilizes factory mounting spots and does not require any drilling or modification.

Lightweight HD Aluminum Design: This premium rear bumper offers a lightweight heavy duty solution to protect the rear end of your Jeep. Weighing in at mere 50 pounds and built for strength. The lighter weight compared to most aftermarket steel bumpers will keep your fuel mileage in check while the 6mm thick aluminum plate provides the necessary strength. While the steel mounting brackets provide a superior substructure to tie the bumper into the frame. This bumper offers a aggressive style with performance you can count on.

Recovery Ready: The supplied d-ring mounts are made from 3/4" thick steel and have integrated tow strap hooks on top. The integrated holes accept 3/4" D-Rings using a 7/8" pin size giving your Jeep a bold aggressive look with multiple recovery points for all your trail riding adventures. The face of the bumper offers two stout Hi-Lift jack points for safe and simple jacking. These holes also help prevent the jack from sliding off for a safer user friendly solution. For superior strength the Hi-Lift jack will lift up on the steel plate mounted behind the aluminum bumper fascia. D-Rings are sold separately.Large Spare Tire Opening w/ Non-Slip Step: This large opening will allow for use with larger spare tires. Measuring 25" at the top and descending 4" to a width of 18.5" at the bottom. We also incorporated a dimpled landing pad 18" x 5" to be used as a step allowing you to load up a roof rack with ease once the spare tire is hinged open. Giving you ample space for both feet with grip.

Hitch Compatible: Notched in the bottom center for a perfect fit with the factory hitch. We also include a spacer kit to lower down the existing hitch plug for seamless operation and easy access. Allowing you to maintain your factory tow rating.

Included License Plate Mount: The included all aluminum license plate mount installs on the driver side to existing holes on the bumper. The bolt on design also allows you the ability to use other license plate mounting options if preferred. Please note that the license plate light is sold separately.

Simple No Drill Installation: This bumper is a direct bolt on installation that does not require any drilling or modification. This easy installation is for the do it yourself installer that can be done with basic hand tools.

Our QRC rear bumper is available with a swing out tire carrier for oversized spares and is the perfect companion to our QRC front bumper. QRC Rear bumpers are constructed from 2" diameter tubing with .120" wall thickness for extreme trail protection and feature welded end caps. The heavy duty QRC rear bumper is designed with sloping ends for improved departure angles while protecting your vehicle from off road trail damage. Bumpers include a 2" receiver tube for accessories such as cargo racks and bicycle carriers but is NOT intended for towing. Over time, heavy, oversized spare tires can fatigue and destroy a tailgate, especially during off road driving. The QRC rear bumper with spare tire carrier option relocates the spare tire mounting point from the tailgate and places the spare tire weight onto the QRC frame mounted bumper. Our tire carriers feature a grease fitting and are fully adjustable for multiple tire sizes and wheel offsets and will hold up to a 35" tire. Our durable dual stage textured black powder coatings provide lasting good looks for many years and feature a full three year limited warranty.

Not designed for use with original equipment wheels.